Window and door software from the field measure to the walkthrough.
Retrofits, whole-house orders, patio sliders and entry doors in one place. Built for small window and door shops, where one wrong unit can eat the profit on the job.
- Measure
- Order
- Remove
- 14 retrofit windows$12,600
- Removal and installation$5,880
- Flashing, trim and caulk$2,240
Window and door jobs, step by step
The units are made to order and cannot go back, and the flashing is covered the same day it goes on. Opsite gives the job its own steps, so the order is checked before it is placed and every opening is photographed before the trim.
- Measure
- Order
- Remove
- Install & Flash
- Trim & Seal
- Walkthrough
- ✓ Measure: every opening, bedroom egress and tempered glass locations on record
- ✓ Order: the order checked line by line, the units on a purchase order, the permit tracked
- ✓ Units counted and checked for size and damage before Remove starts
- ✓ Remove and Install & Flash: rot found, sill pans and flashing photographed opening by opening
- ✓ Trim & Seal: stucco or siding patch, caulk, hardware and screens on the punch list
- ✓ Inspections tracked: Order Sign-Off, Egress & Safety Glass, Rough Opening, Flashing Photos, Lead-Safe Cleanup (EPA RRP), Final
- ✓ Walkthrough: every unit operated with the client, energy labels photographed, warranty papers handed over
What changes for window and door contractors
Six things owners tell us they wanted and could not get from paper, texts and three different apps.
The order is checked before it is placed
Special-order units cannot be returned. The Order Sign-Off checklist covers three-point measurements, swing direction, frame type, tempered and egress units, and that the client signed the order sheet.
Flashing photos before the trim goes on
Sill Pan and Flashing are photo categories on every job. When a leak call comes three winters later, you can show how each opening was flashed.
Rot is a signed change order
The old unit comes out and the sill is soft. Photograph it, price it and send a change order the client signs before the new unit goes in.
Paid when the units land
You pay the dealer long before the walkthrough. Tie the payment schedule to the job's steps, so the big payment is due when the units are delivered.
No open hole waiting on a re-order
A checklist before Remove asks if every unit is delivered, counted and checked for size and damage, and if the permit is issued.
Labels still on the glass for the inspector
Egress sizes, tempered glass stamps and energy labels are on the checklists, so nobody peels a label or misses a bedroom window before the final.
Your day today, and your day on Opsite
The same seven moments of a normal week, side by side.
| What | How most small shops run it | With Opsite |
|---|---|---|
| Placing the order | Sizes copied from the estimate onto the dealer's form | Order Sign-Off checklist done before the order is placed |
| Units arrive | Stacked in the garage, opened on install day | Counted and checked for size and damage, with photos |
| Rot in the opening | A phone call and a price said out loud | Photos, a price and a change order the client signs |
| Flashing | Covered by trim, no record | Sill pan and flashing photos saved before trim |
| Homes built before 1978 | Lead-safe paperwork in a binder in the truck | Lead-Safe Cleanup (EPA RRP) checklist on the job |
| The big payment | Due at the end, long after you paid the dealer | Due when the units are delivered to the job |
| Install day | Blinds up, alarm sensors on, the crew waits | Checklist before Remove: furniture, blinds and sensors moved |
Questions window and door contractors ask us
Is Opsite only for big window and door companies?
No. It is built for small shops: an owner who sells and measures, an office person and one or two install crews. One whole-house job is enough to start.
Can it keep track of special-order units?
Yes. The Order step has its own sub-tasks: review the order sheet with the client, place the order, pull the permit, inspect units on delivery. You can write a purchase order to the dealer, and a checklist before Remove asks if every unit arrived in the right size.
What happens when we find rot behind the old window?
Take photos under Rot & Damage Found, write a change order with the price, and the client signs it before the new unit goes in. The signed change order stays on the job.
Does it help with lead-safe work on older homes?
It does not replace your certified renovator. It gives the job a Lead-Safe Cleanup (EPA RRP) checklist: renovator assigned, pamphlet signed, plastic down, HEPA vacuum and wet wipe, cleaning verification recorded. Setup photos go under Lead-Safe Setup.
Does Opsite measure the openings or send the order to my dealer?
No. You measure and order the way you do now. Opsite keeps what goes around it: the checks, the photos, the purchase order, the change orders and the payments.
How much does it cost?
Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.
See it on one of your own jobs
Bring a real job from last month. We will set up its steps and send its proposal in front of you.
- Leave your details. It takes a minute.
- We look at your company and contact you. A person calls or texts you.
- We show Opsite on your own jobs. Then you decide.
We open access one company at a time. You do not need a card or a contract to ask.
What is Opsite for window and door contractors?
Opsite is software for contractors and trade companies. For window and door contractors it runs each job through its own steps, with a checklist for every inspection, daily photos, change orders the client signs and a punch list. Proposals with a payment schedule, invoices, online payment, purchase orders, a time clock and a client portal are part of the same account.
Not your trade?
Opsite has a page for each trade, with its own steps and checks.