Features Trades AI Software Guide AI Agents Done for you Pricing Blog About FAQ Sign in Get access
DW-101

Drywall and insulation software from the board count to the light check.

Whole-house hang and finish, patches, texture match and attic insulation in one place. Built for small crews that work for builders and for homeowners.

ProposalSample
Insulate, hang and finish, 500 sq ft ADU
Gloria Mendes · 1407 Juniper Way · From: Sam
  1. Measure
  2. Stock
  3. Insulate
  • Wall and ceiling insulation$1,900
  • Drywall hang$3,400
  • Tape, finish and texture$4,300
Signed online
Proposal total$9,600
DW-102Step by step

Hang and finish jobs, step by step

Insulation has to pass before board covers it, and screws have to pass before mud covers them. Opsite gives the job its own steps, so nothing is covered early and the finish level is agreed before the first coat.

  1. Measure
  2. Stock
  3. Insulate
  4. Hang
  5. Tape & Mud
  6. Texture
  7. Walkthrough
  • ✓ Measure: finish level and texture agreed and written into the proposal
  • ✓ Stock: board, mud and insulation delivered room by room, floors and windows protected
  • ✓ Insulate: air sealing and insulation photographed before any board is hung
  • ✓ Hang: screw pattern and fire-rated assemblies photographed before tape
  • ✓ Tape & Mud and Texture: a texture sample approved, then a light check on every wall
  • ✓ Inspections tracked: Insulation, HERS Insulation (QII), Screw / Nailing, Fire-Rated Assembly, Finish Level Sign-Off, Final
  • ✓ Walkthrough: touch-ups on the punch list, scrap-out, sign-off with the builder or owner
DW-103Drywall & Insulation

What changes for drywall and insulation contractors

Six things owners tell us they wanted and could not get from paper, texts and three different apps.

Nothing is covered before it passes

A checklist before Hang asks if the insulation inspection passed and the backing is in. A checklist before Tape & Mud asks about the screw inspection. No joints cut back open.

The finish level is in writing

Level 4 or level 5 and the texture go in the proposal the client signs. The Finish Level Sign-Off check is done with a light along the wall, not by opinion.

Texture match without the fight

The standard terms on your proposal say a patch is matched as closely as possible, not exactly. A checklist before Texture asks if the sample was approved.

A record of what was not ready

Missing backing, bowed studs, no heat in the building. A daily log with photos shows the builder why the hangers lost a day, with the date on it.

Patching after other trades is paid work

The plumber opens a finished wall. Photograph it and send a change order for the return trip. The builder signs before you patch.

Billed when the board is stocked

Board and mud are bought before a sheet is hung. Tie payments to the steps: board stocked, hung and screw inspection passed, taped and textured, final walkthrough.

DW-104Before and after

Your day today, and your day on Opsite

The same seven moments of a normal week, side by side.

WhatHow most small shops run itWith Opsite
Finish levelAgreed on the phone, argued at the walkthroughLevel 4 or 5 written in the signed proposal
Insulation inspectionHangers show up, the inspector has notChecklist before Hang asks if insulation passed
House not ready for boardA call to the builder, no recordDaily log with photos of the missing backing
Screw inspectionTapers start early, joints get cut back openScrew / Nailing tracked before Tape & Mud starts
Patches after other tradesDone for free to keep the builder happyA change order the builder signs first
Texture matchThe client expects the patch to vanishSample approved first, matching term in the proposal
Billing the builderOne invoice after the final sandPayments at stock, hang, texture and walkthrough
DW-105

Questions drywall and insulation contractors ask us

Is Opsite only for big drywall companies?

No. It is built for small outfits: an owner who bids and runs the work, a few hangers and tapers, maybe an office person. A one-room patch and a whole-house hang and finish both fit.

I work mostly for general contractors. Does it still fit?

Yes. The builder is the client on the job. The builder signs your proposal and your change orders, and your daily logs, photos and inspection sign-offs are the record of what was done and when.

Can I run insulation and drywall on the same job?

Yes. Insulate is its own step before Hang, with the Insulation and HERS Insulation (QII) checks. An attic insulation job can also be bid alone, with insulation line items in the proposal.

Does it count board from the plans?

No. Opsite has no takeoff or measuring tool. You count board the way you do now and put the numbers in the proposal.

How do I show a wall was fine when I left?

Photos. Light Check and After are photo categories on every job, and the Final checklist covers touch-ups, screw pops and the walkthrough. Damage after that is a change order.

How much does it cost?

Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.

DW-106We contact you

See it on one of your own jobs

Bring a real job from last month. We will set up its steps and send its proposal in front of you.

  1. Leave your details. It takes a minute.
  2. We look at your company and contact you. A person calls or texts you.
  3. We show Opsite on your own jobs. Then you decide.

We open access one company at a time. You do not need a card or a contract to ask.

DW-107

What is Opsite for drywall and insulation contractors?

Opsite is software for contractors and trade companies. For drywall and insulation contractors it runs each job through its own steps, with a checklist for every inspection, daily photos, change orders the client signs and a punch list. Proposals with a payment schedule, invoices, online payment, purchase orders, a time clock and a client portal are part of the same account.

Not your trade?

Opsite has a page for each trade, with its own steps and checks.

End of sheet set · DW-101 to DW-107