Features Trades AI Software Guide AI Agents Done for you Pricing Blog About FAQ Sign in Get access
PS-101

Pool software for repair calls, equipment swaps and replasters.

Dead pumps, heaters that will not fire, leaks and full replasters in one place. Built for small pool companies that do repairs and remodels.

Service callSample
Pump hums, will not start
Marisol Vega · 88 Linden Way · Tech: Tomas
  1. Booked
  2. On site
  3. Done & paid
  • Pump motor replace$685
  • + Filter clean$165
  • Variable-speed pump$2,150
Signed on the phone
Paid on site$850
PS-102Booked · On site · Done & paid

From the phone call to the payment, in four steps

Every call has three states your whole team can see: Booked, On site, Done and paid. Nothing sits in a text thread.

  1. Book

    Take the call, pick the address, the tech and the time. The heater-will-not-fire call lands on the right tech's day.

  2. On the way

    One tap texts the customer that the tech is on the way. No more "where are you?" calls to the office.

  3. On site

    The tech picks the price from your price book, adds options, takes photos and writes what was found and done. A pump that hums and will not start can go out as three choices: a new motor, the motor with a filter clean, or a variable-speed pump. The customer signs on the phone.

  4. Done & paid

    Card or bank on the spot, or a pay link by text. The customer gets a service report, and a few minutes later a request for a review.

The owner sees the whole day by tech. Each tech sees only their own day. Text messages need a one-time number registration, which we set up with you.

PS-103Projects

Replasters, equipment pads and heaters, step by step

A replaster is not a repair call: once the pool is drained, every day it sits empty is a risk. Opsite gives it its own seven steps, so the permit, the inspections and the nonstop fill happen in order.

  1. Assessment
  2. Permit
  3. Demo & Plumbing
  4. Equipment
  5. Tile & Plaster
  6. Startup
  7. Closeout
  • ✓ Assessment: the pool, the equipment pad, the water and any leak or pressure test on record
  • ✓ Permit: the permit, HOA approval, and tile and finish selections approved in writing
  • ✓ Demo & Plumbing: a checklist before the pool is drained, and change orders for what the chip-out uncovers
  • ✓ Equipment: pump, filter, heater and automation set, with data plate and serial photos
  • ✓ Inspections tracked: Plumbing Pressure Test, Bonding / Electrical, Gas Line, Pre-Plaster, Safety Barrier & Alarms, Final
  • ✓ Tile & Plaster, then Startup, with a Startup Water Chemistry checklist and photos of the readings
  • ✓ Closeout: equipment walkthrough with the client, manuals and warranty paperwork handed over
PS-104Pool & Spa

What changes for pool companies

Six things owners tell us they wanted and could not get from paper, texts and three different apps.

Every equipment pad is on file

The pump, filter, heater and salt system at each address stay with the notes and past visits. The tech knows the pad before opening the side gate.

Repair it or replace it, priced at the pad

A dead pump goes out as a motor, a motor with a filter clean, or a variable-speed pump. The customer picks and signs on the phone.

What draining uncovers gets signed

Hollow plaster, a shell crack or a broken pipe under the deck becomes a change order with photos. The client signs before the repair, not after the fill.

Ready on inspection day

A checklist before each inspection: gauges holding, glue joints and bond wire uncovered, side gate unlocked, dogs put away. A failed inspection with an empty pool costs days.

Paid when the plaster is on

Plaster is the biggest cost on the job. Progress payments are tied to the steps, so that payment comes due when Tile & Plaster is done, not weeks after startup.

A startup record if the finish is questioned

Startup Water Chemistry is a checklist on the job, with photos filed under Startup Readings. When a stain shows up months later, you have what the water looked like at handover.

PS-105Before and after

Your day today, and your day on Opsite

The same seven moments of a normal week, side by side.

WhatHow most small shops run itWith Opsite
Heater will not fireA voicemail and a callback tomorrowBooked on a tech's day with the pad's history
Repair or replaceA number said out loud at the padUp to three priced options the customer signs
After the pool is drainedExtra work on a handshakeA change order with photos, signed before the repair
Inspection dayHope the side gate is unlockedA checklist before each inspection, from gauges to gate
Plaster paymentInvoiced after the crew has leftA progress payment tied to the Tile & Plaster step
StartupReadings on a card that gets wetStartup Water Chemistry checklist and photos on the job
Next seasonThe customer calls when it breaksA yearly reminder for a filter clean or heater service
PS-106

Questions pool companies ask us

Is Opsite only for big pool companies?

No. It is built for small pool companies: an owner, an office person, a repair tech or two and the plaster crew you bring in. You can start with repair calls and add remodels later.

Does it schedule weekly pool cleaning?

No. Opsite does not plan recurring weekly visits. It is for repair calls, equipment replacements and remodels, plus a yearly reminder to offer an equipment check, a filter clean or a heater service.

Does it handle the permit and inspections on a remodel?

Opsite tracks the permit and each inspection on the job, with a checklist for each one, from Plumbing Pressure Test to Final. It does not pull the permit for you.

What happens when we find more damage after draining?

Write a change order on the job with the photos and the price. The client signs it before that work is done, so a cracked shell is not a surprise on the final invoice.

Do I need all seven steps for a heater swap or a green pool?

No. A repair, a green pool cleanup or a small equipment swap is a service call: Booked, On site, Done and paid. The seven steps are for replasters, remodels and equipment jobs with a permit.

How much does it cost?

Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.

PS-107We contact you

See it on one of your own calls

Bring a real call from last week. We will book it, price it and close it in front of you.

  1. Leave your details. It takes a minute.
  2. We look at your company and contact you. A person calls or texts you.
  3. We show Opsite on your own calls. Then you decide.

We open access one company at a time. You do not need a card or a contract to ask.

PS-108

What is Opsite for pool companies?

Opsite is software for contractors and service companies. For pool companies it runs service calls from booked to paid, with a price book, options the customer signs on the phone, payment on the spot, a service report and a review request. Bigger jobs run as projects with their own steps, permits and inspections. Proposals, invoices, purchase orders, a time clock and a client portal are part of the same account.