Locksmith software for lockouts, rekeys and door hardware jobs.
Lockouts, rekeys, car keys and panic bars on one board. Built for small locksmith shops, where the owner is often the one in the van.
- Booked
- On site
- Done & paid
- Rekey 5 locks, 6 keys$185
- + New deadbolt, front door$145
- Keypad smart lock$389
From the phone call to the payment, in four steps
Every call has three states your whole team can see: Booked, On site, Done and paid. Nothing sits in a text thread.
Book
Take the call, pick the address, the tech and the time. The lockout call lands on the right locksmith's day.
On the way
One tap texts the customer that the tech is on the way. No more "where are you?" calls to the office.
On site
The tech picks the price from your price book, adds options, takes photos and writes what was found and done. A move-in rekey can go out as three choices: rekey the locks, rekey with a new deadbolt, or a keypad lock on the front door. The customer signs on the phone.
Done & paid
Card or bank on the spot, or a pay link by text. The customer gets a service report, and a few minutes later a request for a review.
The owner sees the whole day by tech. Each tech sees only their own day. Text messages need a one-time number registration, which we set up with you.
Building rekeys and door hardware jobs, step by step
Rekeying twelve units or hanging a panic bar on an exit door is not a lockout. Opsite gives it a signed proposal and the trade's own four steps, so who approved the work and who got which keys is written down.
- Arrive
- Verify the Customer
- Work
- Test
- ✓ Proposal with the lock count, keys per unit and hardware, signed online by the owner or manager
- ✓ Arrive: the job and the price confirmed, the door, frame and existing lock photographed
- ✓ Verify the Customer: photo ID and proof of authority recorded before any lock is opened
- ✓ Work: a checklist before the step starts, then rekey, replace or install
- ✓ Checks tracked: ID / Proof of Residence, Keys Tested, Egress & Fire-Rated Hardware, Key Count & Handover
- ✓ Photos filed by ID & Authorization, Existing Damage, Fire Door Label, New Hardware and Key Count
- ✓ Closeout at Test: every key in every lock, keys counted and handed over, final invoice paid
What changes for locksmiths
Six things owners tell us they wanted and could not get from paper, texts and three different apps.
Proof you checked who let you in
On a call, the tech photographs the ID and the proof of residence, and the customer signs on the phone. On a bigger job, Verify the Customer is its own step with its own checklist.
The price is signed before the lock is touched
The tech picks the lockout or rekey from your price book. The customer sees the number and signs, so there is no argument at the door after it is open.
Paid at the door, even at 1 a.m.
Card or bank on the spot, or a pay link by text. Nobody mails a check for a lockout.
Drill it only with a signature
When a lock may have to be drilled, offer it as a priced option with the replacement. The customer picks it and signs first.
A key count for every building
Key Count & Handover is a checklist on the job: keys cut against the work order, and who received them. When a property manager asks how many masters were cut, the answer is on the job.
A review while the relief is fresh
After a paid lockout the customer is asked how it went. A happy one is sent to your Google page; an unhappy one alerts you first.
Your day today, and your day on Opsite
The same seven moments of a normal week, side by side.
| What | How most small shops run it | With Opsite |
|---|---|---|
| Lockout at night | Your cell rings, you scribble an address | Booked on a locksmith's day, with an on-the-way text |
| The price | A phone quote, then an argument | Picked from your price book and signed before work |
| Who let you in | You glanced at an ID | ID and proof photographed, signature saved with the call |
| Drilling a lock | A verbal OK on the porch | A priced option the customer signs first |
| Building rekey | A unit list on a clipboard | A signed proposal, four steps and a key count |
| Exit door hardware | Installed and never looked at again | Egress & Fire-Rated Hardware checklist, fire label photographed |
| The same property manager | Start from zero every visit | Notes and past visits on each address |
Questions locksmiths ask us
Is Opsite only for big locksmith companies?
No. It is built for small shops, down to an owner in one van with someone answering the phone. A locksmith runs the whole call from a phone.
Can I record the ID check on a lockout?
Yes. The tech takes a photo, writes it in the call's notes, and the customer signs on the phone. On bigger jobs, Verify the Customer is its own step with an ID / Proof of Residence checklist.
How do customers pay after hours?
By card or bank on the spot, or with a pay link sent by text. After-hours service is a line in your own price book.
Does it work for commercial jobs like panic bars and master key systems?
Yes. Those run as a job with a signed proposal, a payment schedule and an Egress & Fire-Rated Hardware checklist. Opsite does not design the master key system; it keeps the job, the checklists and the photos.
Do I have to use the four steps on every call?
No. A lockout or a rekey is a service call: Booked, On site, Done and paid. The four steps, Arrive, Verify the Customer, Work and Test, are for building rekeys and hardware jobs.
How much does it cost?
Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.
See it on one of your own calls
Bring a real call from last week. We will book it, price it and close it in front of you.
- Leave your details. It takes a minute.
- We look at your company and contact you. A person calls or texts you.
- We show Opsite on your own calls. Then you decide.
We open access one company at a time. You do not need a card or a contract to ask.
What is Opsite for locksmiths?
Opsite is software for contractors and service companies. For locksmiths it runs service calls from booked to paid, with a price book, options the customer signs on the phone, payment on the spot, a service report and a review request. Bigger jobs run as projects with their own steps, permits and inspections. Proposals, invoices, purchase orders, a time clock and a client portal are part of the same account.
Not your trade?
Opsite has a page for each trade, with its own steps and checks.