Features Trades AI Software Guide AI Agents Done for you Pricing Blog About FAQ Sign in Get access
AR-101

Appliance repair software for the service call and the install.

Warm refrigerators, dryers that will not heat, leaking dishwashers and kitchen package installs in one place. Built for small appliance shops with a few techs, not for a national service network.

Service callSample
Gas dryer not heating
Priya Nolan · 2217 Alder Ct · Tech: Luis
  1. Booked
  2. On site
  3. Done & paid
  • Igniter and gas valve coils$289
  • + Dryer vent cleaning$159
  • Repair plus belt and rollers$469
Signed on the phone
Paid on site$448
AR-102Booked · On site · Done & paid

From the phone call to the payment, in four steps

Every call has three states your whole team can see: Booked, On site, Done and paid. Nothing sits in a text thread.

  1. Book

    Take the call, pick the address, the tech and the time. The refrigerator-not-cooling call lands on the right tech's day.

  2. On the way

    One tap texts the customer that the tech is on the way. No more "where are you?" calls to the office.

  3. On site

    The tech picks the price from your price book, adds options, takes photos and writes what was found and done. A gas dryer that will not heat can go out as three choices: a new igniter and coils, the same repair with a vent cleaning, or the repair plus a new belt and rollers. The customer signs on the phone.

  4. Done & paid

    Card or bank on the spot, or a pay link by text. The customer gets a service report, and a few minutes later a request for a review.

The owner sees the whole day by tech. Each tech sees only their own day. Text messages need a one-time number registration, which we set up with you.

AR-103Projects

Install packages and ordered-part repairs, step by step

A kitchen package install, or a repair that waits a week on a special-order part, is more than one visit. Opsite gives it the trade's four steps, so the estimate, the part and the leak check do not depend on one tech's memory.

  1. Diagnose
  2. Parts
  3. Repair
  4. Test
  • ✓ Diagnose: model and serial, the complaint, error codes and the failed part on record
  • ✓ Written estimate signed by the customer before a special-order part is ordered
  • ✓ Parts: part numbers matched to the model, and the return visit on the schedule
  • ✓ Repair: a checklist before the step starts, with power, gas and water shut off and the floor protected
  • ✓ Checks tracked: Model & Serial on Record, Gas Leak Check, Water Leak Check, Test Run With Customer, Install Sign-Off
  • ✓ Photos filed by Model & Serial Tag, Error Code, Failed Part, New Part Installed and Leak Check
  • ✓ Closeout at Test: a full cycle with the customer watching, old parts handed over, final invoice paid
AR-104Appliance Repair

What changes for appliance repair companies

Six things owners tell us they wanted and could not get from paper, texts and three different apps.

The model and serial are already there

The appliance, its model and its serial stay on the address with the notes and past visits. The part gets looked up against the real tag, not a guess over the phone.

Repair, repair plus, or replace

Offer up to three priced choices from your price book on the same visit. The customer picks one and signs on the phone before a part is ordered.

The diagnosis fee gets collected

The service call charge is a line in your price book. When the customer says no to the repair, the tech still takes payment for the trip at the door.

Jobs waiting on a part stay in sight

A repair that needs a special-order part runs as a job with four steps: Diagnose, Parts, Repair, Test. It sits in Parts until the part is in and the return visit is on the schedule.

Photos before the unit is pulled out

Existing dents, scratches and floor wear are photographed first, then the failed part, the new part and the leak check. The customer gets them in the service report.

It broke again, and you know it

A return to the same address within 30 days is marked as a warranty callback. You see which repairs come back, with the last visit's notes in front of you.

AR-105Before and after

Your day today, and your day on Opsite

The same seven moments of a normal week, side by side.

WhatHow most small shops run itWith Opsite
The four-hour windowThe customer calls to ask where the tech isOne tap texts that the tech is on the way
Model and serialThe customer reads the tag over the phone, maybeSaved on the address with the unit and past visits
Customer declines the repairThe diagnosis fee gets waived or forgottenService call charge paid at the door by card
Waiting on a partA sticky note on the dashboardThe job sits in the Parts step until the return visit
Gas and water connectionsThe tech says he checkedA Gas Leak Check and Water Leak Check list on the job
It broke againAn argument about who paysA return within 30 days is marked as a warranty callback
Dryer vent next yearThe customer forgets, and so do youA yearly reminder to offer the cleaning again
AR-106

Questions appliance repair companies ask us

Is Opsite only for big appliance repair companies?

No. It is built for small shops: an owner who still runs calls, someone on the phone and a few techs. Most days you will only use the service call.

What happens when a part has to be ordered?

Run the repair as a job with your trade's four steps: Diagnose, Parts, Repair, Test. The customer signs the estimate first, the job waits in Parts, and the return visit goes on the schedule.

Can a customer pay only the diagnosis fee?

Yes. The service call charge is a line in your price book. If the customer does not approve the repair, the tech takes payment for that line alone, by card or bank, or sends a pay link by text.

Does it keep the model and serial for each appliance?

Yes. Equipment and notes are kept per address with past visits. On a job, the Model & Serial on Record check reminds the tech to photograph the tag and type the numbers.

Can I use it for appliance installs too?

Yes. An install gets a proposal the customer signs online, a payment schedule, and an Install Sign-Off checklist: anti-tip bracket, metal dryer duct, new water lines, old unit hauled off.

How much does it cost?

Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.

AR-107We contact you

See it on one of your own calls

Bring a real call from last week. We will book it, price it and close it in front of you.

  1. Leave your details. It takes a minute.
  2. We look at your company and contact you. A person calls or texts you.
  3. We show Opsite on your own calls. Then you decide.

We open access one company at a time. You do not need a card or a contract to ask.

AR-108

What is Opsite for appliance repair companies?

Opsite is software for contractors and service companies. For appliance repair companies it runs service calls from booked to paid, with a price book, options the customer signs on the phone, payment on the spot, a service report and a review request. Bigger jobs run as projects with their own steps, permits and inspections. Proposals, invoices, purchase orders, a time clock and a client portal are part of the same account.