Handyman software that runs the visit, the list and the payment.
One-item fixes, half-day visits and two-day rental turnovers on one board. Built for small handyman companies, not a franchise with a call center.
- Booked
- On site
- Done & paid
- Adjust hinges and strike$165
- + New weatherstrip$95
- Half-day visit, whole list$480
From the phone call to the payment, in four steps
Every call has three states your whole team can see: Booked, On site, Done and paid. Nothing sits in a text thread.
Book
Take the call, pick the address, the tech and the time. The half-day visit lands on the right handyman's day, with the client's list in the notes.
On the way
One tap texts the customer that the tech is on the way. No more "where are you?" calls to the office.
On site
The tech picks the price from your price book, adds options, takes photos and writes what was found and done. A front door that will not latch can go out as three choices: adjust the hinges and strike plate, do that and replace the weatherstrip, or book a half-day visit for the whole list. The customer signs on the phone.
Done & paid
Card or bank on the spot, or a pay link by text. The customer gets a service report, and a few minutes later a request for a review.
The owner sees the whole day by tech. Each tech sees only their own day. Text messages need a one-time number registration, which we set up with you.
Long lists and rental turnovers, step by step
A two-day turnover list is not a one-hour call. Opsite gives it four steps, so every item is priced, bought for, tested and shown to the client before you ask for payment.
- Visit & Quote
- Materials
- Work
- Walkthrough
- ✓ Visit & Quote: the client's list, one line per item, with before photos
- ✓ Quote signed online before you buy a single part
- ✓ Materials: parts picked up for every item, client-supplied items confirmed
- ✓ Work: the list in the order the client set, floors and furniture protected
- ✓ Anything bigger than the quote goes on a change order the client signs
- ✓ Checks tracked: Job Size Check, Before & After Photos, Leak & Function Test, Customer Walkthrough
- ✓ Walkthrough: each repair tested and shown to the client, items not done put in writing, payment collected
What changes for handyman companies
Six things owners tell us they wanted and could not get from paper, texts and three different apps.
Every item on the list has a price
The client's list goes on the quote one line per item. The thing mentioned in the hallway is either a line with a price or it is not on this visit.
One more thing gets signed
The customer asks for one more fix while you are there. The handyman adds it from your price book and the customer signs on the phone before it is done.
Paid at the walkthrough
Card or bank on the spot. If the owner is at work and the tenant let you in, send a pay link by text.
Photos before you touch anything
Before photos of each item and of the scratches already next to it. When someone says you cracked that tile, you have the picture.
The house remembers
Notes stay on the address with past visits: the paint color, where the water shut-off is, which door sticks. A return within 30 days is marked as a warranty callback.
Last year's customers hear from you
Set a yearly reminder to offer a home check, gutter cleaning or a caulk and seal check. Repeat work stops depending on who remembers to call.
Your day today, and your day on Opsite
The same seven moments of a normal week, side by side.
| What | How most small shops run it | With Opsite |
|---|---|---|
| The client's list | A photo of a sticky note in a text | One line per item on the quote, with a price |
| One more thing on site | Done as a favor, forgotten on the bill | Priced from your price book, signed on the phone |
| Pricing a visit | A number from memory in the driveway | Half-day, full-day and per-job prices in your price book |
| Something bigger behind the wall | Work stops, then a long phone call | A photo, up to three options, and a signature |
| Getting paid | A check next week, maybe | Card, bank or a pay link at the walkthrough |
| Did you scratch that? | Your word against the client's | Before photos of each item and the area around it |
| Repeat work | They call when something breaks | Yearly reminders: home check, gutter cleaning, caulk and seal check |
Questions handyman companies ask us
Is Opsite only for big handyman companies?
No. It is built for small ones: an owner who still does jobs, maybe one person in the office, and a few handymen. A one-truck company can run on it.
Can I sell half-day and full-day visits?
Yes. Put half-day, full-day, extra hours and your trip charge in the price book next to your per-job prices. The handyman picks from it on site and the customer signs on the phone.
What happens when the customer adds to the list?
The handyman prices the extra item from the price book and the customer signs before it is done. On a multi-day job it goes on a change order the client signs.
Can I use it for rental turnovers when the owner is not there?
Yes. A turnover is a job with four steps: Visit & Quote, Materials, Work, Walkthrough. The owner signs the quote online, sees the before and after photos in the client portal, and pays from there.
How does a customer who was not home see what was done?
After a paid call the customer gets a service report: what was found, what was done, and the photos. Then they are asked for a review. A happy customer is sent to your Google page, and an unhappy one alerts you first.
How much does it cost?
Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.
See it on one of your own calls
Bring a real call from last week. We will book it, price it and close it in front of you.
- Leave your details. It takes a minute.
- We look at your company and contact you. A person calls or texts you.
- We show Opsite on your own calls. Then you decide.
We open access one company at a time. You do not need a card or a contract to ask.
What is Opsite for handyman companies?
Opsite is software for contractors and service companies. For handyman companies it runs service calls from booked to paid, with a price book, options the customer signs on the phone, payment on the spot, a service report and a review request. Bigger jobs run as projects with their own steps, permits and inspections. Proposals, invoices, purchase orders, a time clock and a client portal are part of the same account.
Not your trade?
Opsite has a page for each trade, with its own steps and checks.