Landscaping software that runs the install from plan to walkthrough.
Irrigation, pavers, walls, planting and lighting on one job, in the order they have to happen. Built for small landscape contractors who install, not for mowing crews.
- Design
- Demo & Grading
- Irrigation
- Irrigation, six zones$6,800
- Paver patio, 400 sq ft$14,400
- Planting, drip and mulch$7,950
Yard projects, step by step
A yard goes in from the ground up, and the order matters: sleeves before pavers, the pressure test before backfill, hardscape before plants. Opsite keeps the job in that order, so nobody trenches through a finished patio.
- Design
- Demo & Grading
- Irrigation
- Hardscape
- Planting
- Lighting
- Walkthrough
- ✓ Design: the plan and plant list the client signed, HOA approval and permits on file
- ✓ Demo & Grading: 811 ticket number, marks photographed, rough grade and drains
- ✓ Irrigation: backflow device, mainline, valves and sleeves, pressure test before backfill
- ✓ Hardscape: base compacted in lifts, pavers, walls and steps, edge restraint
- ✓ Planting and Lighting: plants checked against the list, drip, mulch, lights aimed after dark
- ✓ Inspections tracked: 811 Utility Locate, Irrigation Pressure Test, Backflow Device Test, Retaining Wall Footing, Base Compaction
- ✓ Walkthrough: every zone run with the client, controller set, care sheet and punch list
What changes for landscape contractors
Six things owners tell us they wanted and could not get from paper, texts and three different apps.
The 811 ticket is on the job
Ticket number and photos of the marks are saved before the first shovel goes in. If a line gets hit, you can show what was marked and what was not.
Sleeves go in before the pavers
A checklist before Hardscape asks for the pressure test, the sleeves under paving and the drain lines. Nobody saw-cuts a new patio to pull one wire.
What you dig up gets a price
Buried concrete, big roots, an old irrigation line nobody mentioned. It goes on a change order the client signs before the crew keeps digging.
Payments follow the yard
Bill when demo and grading are done, again after irrigation and hardscape, again after planting and lighting. Each payment is tied to a step the client can see.
Plant swaps in writing
The nursery is out of the tree on the plan. The substitute goes to the client as a change order to sign before it goes in the ground.
A walkthrough that closes the job
Run every zone with the client, set the controller, hand over the care sheet. What is left goes on a punch list, not into three months of texts.
Your day today, and your day on Opsite
The same seven moments of a normal week, side by side.
| What | How most small shops run it | With Opsite |
|---|---|---|
| 811 before digging | Somebody called it in, probably | Ticket number and photos of the marks on the job |
| Sleeves under paving | Remembered after the pavers are down | On the checklist before Hardscape starts |
| Mainline pressure test | Backfilled the same afternoon | Gauge photo with the date, trenches still open |
| Buried concrete and old lines | Eat the cost or argue at the end | A change order signed before the crew keeps digging |
| Plant substitutions | A phone call nobody remembers | Signed by the client before the plant goes in |
| Progress payments | Half up front, half whenever | Tied to grading, irrigation and hardscape, planting, walkthrough |
| Walkthrough | A wave from the driveway | Every zone run with the client, punch list written |
Questions landscape contractors ask us
Is Opsite only for large landscape companies?
No. It is built for small contractors: an owner, a foreman or two, and crews that do irrigation, pavers and planting. You do not need an office staff to use it.
Is this for mowing and weekly maintenance?
No. It is built for install work with a start and an end: irrigation, hardscape, planting and lighting. It does not plan weekly maintenance visits.
Can I use it for a job that is only pavers or only irrigation?
Yes. Job types include Paver Patio / Walkway, New Irrigation System, Irrigation Repair, Sod / Artificial Turf, Retaining Wall, Drainage and Landscape Lighting. Each has its own lines on the proposal.
Does Opsite call 811 or pull permits?
No. You call in the ticket and deal with the city. Opsite keeps the ticket number, the photos of the marks, the permit and each check on the job, with a checklist for each one.
What about plants that die after we leave?
The landscaping terms on the proposal say watering and care are the client's after the final walkthrough. The walkthrough checklist covers running every zone with the client and explaining the controller schedule.
How much does it cost?
Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.
See it on one of your own jobs
Bring a real job from last month. We will set up its steps and send its proposal in front of you.
- Leave your details. It takes a minute.
- We look at your company and contact you. A person calls or texts you.
- We show Opsite on your own jobs. Then you decide.
We open access one company at a time. You do not need a card or a contract to ask.
What is Opsite for landscape contractors?
Opsite is software for contractors and trade companies. For landscape contractors it runs each job through its own steps, with a checklist for every inspection, daily photos, change orders the client signs and a punch list. Proposals with a payment schedule, invoices, online payment, purchase orders, a time clock and a client portal are part of the same account.
Not your trade?
Opsite has a page for each trade, with its own steps and checks.