Features Trades AI Software Guide AI Agents Done for you Pricing Blog About FAQ Sign in Get access
GD-101

Garage door software for spring calls, openers and new doors.

Broken springs, dead openers, doors off track and new door installs in one place. Built for small garage door companies with a few trucks.

Service callSample
Broken spring, car stuck inside
Teresa Malloy · 3015 Birchfield Ave · Tech: Kenji
  1. Booked
  2. On site
  3. Done & paid
  • Replace both torsion springs$465
  • + New cables and rollers$185
  • New insulated 16x7 door$2,950
Signed on the phone
Paid on site$650
GD-102Booked · On site · Done & paid

From the phone call to the payment, in four steps

Every call has three states your whole team can see: Booked, On site, Done and paid. Nothing sits in a text thread.

  1. Book

    Take the call, pick the address, the tech and the time. The broken spring call, with a car stuck inside, lands on the right tech's day.

  2. On the way

    One tap texts the customer that the tech is on the way. No more "where are you?" calls to the office.

  3. On site

    The tech picks the price from your price book, adds options, takes photos and writes what was found and done. A broken spring can go out as three choices: both springs, both springs with new cables and rollers, or a new door. The customer signs on the phone.

  4. Done & paid

    Card or bank on the spot, or a pay link by text. The customer gets a service report, and a few minutes later a request for a review.

The owner sees the whole day by tech. Each tech sees only their own day. Text messages need a one-time number registration, which we set up with you.

GD-103Projects

New doors and openers, step by step

A new door is special-order: once the size, color and windows are signed, it cannot go back. Opsite gives the install six steps, so the opening is measured, the order is confirmed and the safety tests are on record.

  1. Measure & Quote
  2. Order
  3. Remove Old Door
  4. Install
  5. Balance & Safety Test
  6. Closeout
  • ✓ Measure & Quote: width, height, headroom, side room and backroom written on the job
  • ✓ Order: door model, color, windows and insulation signed off by the client, deposit received
  • ✓ Remove Old Door: new sections checked against the order before the old door comes down
  • ✓ Install: rotted jambs or a bad header photographed and priced as a change order the client signs
  • ✓ Tests tracked: Spring Balance Test, Photo-Eye & Auto-Reverse Test, Battery Backup Test, Hardware & Track Check, Final Walkthrough
  • ✓ Progress payments tied to the steps: door delivered, door and opener installed, safety test passed
  • ✓ Closeout: remotes and keypad programmed, release cord shown to the client, serial number photos, old door hauled away
GD-104Garage Doors

What changes for garage door companies

Six things owners tell us they wanted and could not get from paper, texts and three different apps.

Both springs, or the full rebuild

The tech offers up to three options from your price book. The customer picks one and signs on the phone, so the bigger job is a choice on a screen and not a pitch in the driveway.

Paid while the door is still open

Card or bank on the spot, or a pay link by text. Repairs are due when the work is done, and that is when they get paid.

Safety tests on record

Spring Balance Test, Photo-Eye & Auto-Reverse Test and Battery Backup Test each have a checklist. If a door ever hurts someone, you can show what was tested.

No wrong-size doors

Headroom, side room and backroom, plus the door model, color and windows the client signed off, are checked before the order goes in. Special-order doors do not go back.

Free return trips stop hiding

A noisy door a week after a spring job is a visit you pay for. A return to the same address within 30 days is marked as a warranty callback.

Tune-ups that come back each year

The office sets a yearly reminder to offer a door tune-up or a spring and cable check. Last year's customer hears from you before the spring snaps.

GD-105Before and after

Your day today, and your day on Opsite

The same seven moments of a normal week, side by side.

WhatHow most small shops run itWith Opsite
A broken spring at 7 a.m.Calls and texts until a tech says yesOn the tech's day, with an on-the-way text to the customer
Quoting the repairA number over the phone, then a fightPrice book options the customer picks and signs
Ordering a new doorMeasurements on the back of a receiptOpening, headroom and backroom on the job, order signed off
Safety testsDone, but never written downPhoto-eye, auto-reverse and battery backup checklists with photos
The door is noisy a week laterA free trip nobody countsMarked as a warranty callback on the address
Next year's tune-upThe customer calls when it breaksA yearly reminder to offer the tune-up
Google reviewsThe tech forgets to askAsked after the paid call, happy customers sent to Google
GD-106

Questions garage door companies ask us

Is Opsite only for big garage door companies?

No. It is built for small companies: an owner, someone answering the phone and a few techs. Start with repair calls only and add new door installs when you want.

Can it handle a repair call and a new door install?

Yes. A repair is a service call: Booked, On site, Done and paid. A new door is a job with six steps, from Measure & Quote to Closeout, with a deposit and progress payments.

Do my techs need a laptop in the truck?

No. A tech sees only their own day on a phone, prices the repair from your price book, takes photos, gets the signature and takes payment there.

Does it keep the door and opener details for each house?

Yes. Notes and equipment are kept per address with past visits, so the next tech can see the door, the opener and what was done last time before leaving.

What does the customer get after the repair?

A service report with what was found, what was done and the photos. Then a request for a review: a happy customer is sent to your Google page, and an unhappy one alerts you first.

How much does it cost?

Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.

GD-107We contact you

See it on one of your own calls

Bring a real call from last week. We will book it, price it and close it in front of you.

  1. Leave your details. It takes a minute.
  2. We look at your company and contact you. A person calls or texts you.
  3. We show Opsite on your own calls. Then you decide.

We open access one company at a time. You do not need a card or a contract to ask.

GD-108

What is Opsite for garage door companies?

Opsite is software for contractors and service companies. For garage door companies it runs service calls from booked to paid, with a price book, options the customer signs on the phone, payment on the spot, a service report and a review request. Bigger jobs run as projects with their own steps, permits and inspections. Proposals, invoices, purchase orders, a time clock and a client portal are part of the same account.