Features Trades AI Software Guide AI Agents Done for you Pricing Blog About FAQ Sign in Get access
MA-101

Masonry software from the layout to the final wash down.

Retaining walls, block fences, veneer, chimneys and tuckpointing in one place. Built for small masonry crews that work for homeowners and for builders.

ProposalSample
Block retaining wall, 5 ft by 60 ft
Anita Varga · 340 Cinder Ridge Dr · From: Luis
  1. Estimate & Layout
  2. Permit
  3. Footing
  • Excavation and footing$9,400
  • Block wall, steel and grout$21,600
  • Drainage, waterproofing and cap$6,800
Signed online
Proposal total$37,800
MA-102Step by step

Walls, veneer and chimneys, step by step

Rebar goes under concrete, steel goes under grout and the drain goes under backfill. Opsite gives the job its own steps, so each one is inspected and photographed before it is buried.

  1. Estimate & Layout
  2. Permit
  3. Footing
  4. Lay
  5. Cap & Finish
  6. Clean & Seal
  • ✓ Estimate & Layout: block, brick or stone and mortar color picked, layout marked with the client
  • ✓ Permit: engineering, the permit and the 811 locate tracked on the job
  • ✓ Footing: rebar and dowels photographed, footing inspection passed before the pour
  • ✓ Lay: wall steel, cleanouts and weep holes on record before grout fills the cells
  • ✓ Cap & Finish: caps, joints, drain rock and pipe photographed before backfill
  • ✓ Inspections tracked: Footing, Reinforcing / Pre-Grout, Veneer Lath & Ties, Drainage & Waterproofing, Chimney / Fireplace, Final
  • ✓ Clean & Seal: wash down, joints and caps approved by the client, haul-off and the last payment
MA-103Masonry

What changes for masonry contractors

Six things owners tell us they wanted and could not get from paper, texts and three different apps.

Photos before it is buried

Footing & Rebar, Wall Steel & Grout and Drain & Waterproofing are photo categories on every job. If a wall is ever questioned, you can show what is inside it and behind it.

The sample is approved first

A checklist before Lay asks if the mortar color and joint style were approved on a sample. A Sample Panel photo on the job shows what the client said yes to.

Rock and old footings get signed

What you find in the trench or behind an opened chimney gets a photo, a price and a change order the client signs before the work goes on.

No grout before the inspector

The Reinforcing / Pre-Grout checklist covers bar placement, clean cells, cleanouts and the special inspector, so grout is not ordered a day too early.

Paid at the footing, not only at the end

Block, steel and concrete are bought early. Tie payments to the steps: materials delivered, footing poured, masonry laid up, final clean and walkthrough.

The white powder call is already answered

The standard terms on your proposal say white powder on new masonry is normal and usually weathers away, and that new walls need time to cure before they are backfilled or loaded.

MA-104Before and after

Your day today, and your day on Opsite

The same seven moments of a normal week, side by side.

WhatHow most small shops run itWith Opsite
Mortar colorPicked from a chart, argued on the wallSample approved before Lay, photo under Sample Panel
Footing inspectionConcrete ordered, inspector not bookedFooting inspection tracked before the pour
What is in the wallNobody can show the steel is therePhotos of rebar and grout saved with the job
Rock in the trenchExtra days at the same priceA change order the client signs before digging on
Drain behind the wallBackfilled the same afternoon, no photosDrainage & Waterproofing checklist and photos before backfill
Engineering and permitPapers in the truckPermit and each inspection tracked on the job
Cash on a long wallA deposit, then nothing until the final checkPayments at materials, footing, lay-up and final clean
MA-105

Questions masonry contractors ask us

Is Opsite only for big masonry companies?

No. It is built for small masonry outfits: an owner who bids and lays out, a couple of masons and their laborers. A tuckpointing repair and an engineered wall both fit.

We do small repairs and engineered walls. Does one setup fit both?

Yes. Both use the same six steps, from Estimate & Layout to Clean & Seal. A veneer or tuckpointing job has no permit or footing to track, and its payment schedule can be shorter.

I build walls for general contractors too. Does that work?

Yes. The builder is the client on that job. The builder signs the proposal and any change order, and your inspection sign-offs and photos of the steel, grout and drain show the wall was built to the plans.

Does Opsite do the engineering or pull the permit?

No. Your engineer and the city do that. Opsite tracks the permit and each inspection on the job, and gives your crew a checklist of what the inspector looks at.

What about a client who says the new brick does not match?

The proposal the client signs says natural materials vary and new work next to old is matched as closely as possible. The approved sample is on a checklist and a Sample Panel photo sits on the job.

How much does it cost?

Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.

MA-106We contact you

See it on one of your own jobs

Bring a real job from last month. We will set up its steps and send its proposal in front of you.

  1. Leave your details. It takes a minute.
  2. We look at your company and contact you. A person calls or texts you.
  3. We show Opsite on your own jobs. Then you decide.

We open access one company at a time. You do not need a card or a contract to ask.

MA-107

What is Opsite for masonry contractors?

Opsite is software for contractors and trade companies. For masonry contractors it runs each job through its own steps, with a checklist for every inspection, daily photos, change orders the client signs and a punch list. Proposals with a payment schedule, invoices, online payment, purchase orders, a time clock and a client portal are part of the same account.

Not your trade?

Opsite has a page for each trade, with its own steps and checks.

End of sheet set · MA-101 to MA-107