Features Trades AI Software Guide AI Agents Done for you Pricing Blog About FAQ Sign in Get access
RS-101

Restoration software from the 2 a.m. call to the final walkthrough.

Burst pipes, sewage backups, kitchen fires and mold jobs, from the first call to the rebuild. Built for small restoration companies that have to show their work to an owner and a carrier.

Service callSample
Dishwasher leak, kitchen
Elaine Porter · 915 Sycamore Ln · Tech: Nico
  1. Booked
  2. On site
  3. Done & paid
  • Emergency extraction$850
  • + Drying equipment, 3 days$1,200
  • Dry-out and drywall repair$4,600
Signed on the phone
Paid on site$2,050
RS-102Booked · On site · Done & paid

From the phone call to the payment, in four steps

Every call has three states your whole team can see: Booked, On site, Done and paid. Nothing sits in a text thread.

  1. Book

    Take the call, pick the address, the tech and the time. The burst-pipe call lands on the right tech's day.

  2. On the way

    One tap texts the customer that the tech is on the way. No more "where are you?" calls to the office.

  3. On site

    The tech picks the price from your price book, adds options, takes photos and writes what was found and done. A dishwasher leak can go out as three choices: extraction only, extraction with three days of drying, or the dry-out and the wall repair. The customer signs on the phone.

  4. Done & paid

    Card or bank on the spot, or a pay link by text. The customer gets a service report, and a few minutes later a request for a review.

The owner sees the whole day by tech. Each tech sees only their own day. Text messages need a one-time number registration, which we set up with you.

RS-103Projects

Water, fire and mold jobs, step by step

A loss is not one job: it is an emergency, a dry-out, a tear-out and a rebuild, with an adjuster reading every line. Opsite gives it six steps in order, so demo does not start before the asbestos results and nothing is covered before it is photographed.

  1. Emergency Response
  2. Assessment & Estimate
  3. Dry-Out
  4. Demo
  5. Rebuild
  6. Final
  • ✓ Emergency Response: the source stopped, every room photographed before it is touched, work authorization on file
  • ✓ Assessment & Estimate: moisture map photos, asbestos samples, and the scope and estimate for the owner
  • ✓ Dry-Out: equipment set, and each day's readings written in the daily log with meter photos
  • ✓ Inspections tracked: Daily Moisture Readings, Asbestos & Lead Test Before Demo, Dry Standard Reached, Mold Clearance Test, Adjuster Scope Walk
  • ✓ Demo: a checklist before tear-out, and hidden damage priced as a change order the client signs
  • ✓ Rebuild: drywall, paint, flooring and cabinets on the schedule, with City Inspection (Rebuild) tracked
  • ✓ Final: the Final Walkthrough punch list, contents returned, certificate of completion and final invoice
RS-104Restoration

What changes for restoration companies

Six things owners tell us they wanted and could not get from paper, texts and three different apps.

The drying record is in the daily log

Each day's moisture readings, the equipment count and the meter photos are written in the job's daily log. When someone asks why the equipment ran five days, the five days are there.

Photos before anything is moved

Photos are filed by Source of Loss, Damage, Contents, Moisture Readings and Hidden Damage. You find the shot of the failed supply line without scrolling three camera rolls.

Hidden damage is signed before the work

Wet insulation behind the cabinets becomes a change order with photos. The client signs before the crew opens more wall, not when the final invoice lands.

No tear-out before the lab results

The checklist before Demo asks for asbestos results on file, the tear-out scope approved and the contents packed out. The crew does not start on a guess.

Paid at dry-out, not after the rebuild

Progress payments are tied to the job's steps, starting when dry-out is complete. Your standard terms on the proposal say the client owes the bill, whatever the carrier decides.

The owner stops calling for updates

A family out of their kitchen wants to know what happens today. The client portal shows progress, photos and documents, and they approve and pay there.

RS-105Before and after

Your day today, and your day on Opsite

The same seven moments of a normal week, side by side.

WhatHow most small shops run itWith Opsite
2 a.m. burst pipeA phone call and a paper formBooked on a tech's day, photos from the first minute
Daily readingsA clipboard left in the truckWritten in the daily log with meter photos
Before tear-outCrew starts, results still at the labA checklist before Demo: asbestos results on file
Hidden damageA phone call and a bigger invoice laterA change order with photos, signed first
Adjuster asks for proofDigging through three camera rollsPhotos filed by Source of Loss, Damage, Dry Readings
Getting paidWait for the carrier's checkProgress payments due as each step finishes
Homeowner updatesCalls and texts all dayA client portal with progress, photos and documents
RS-106

Questions restoration companies ask us

Is Opsite only for big restoration franchises?

No. It is built for small independent restoration companies: an owner, an office person and a couple of crews. It runs the whole loss, from the emergency call to the rebuild.

Does Opsite write insurance estimates or connect to carriers?

No. Opsite is not insurance estimating software and has no carrier connection. It keeps the photos, the daily logs, the scope and the signed change orders on the job, so you have them when the adjuster asks.

Where do the daily moisture readings go?

The tech writes them in the job's daily log, with a photo of the meter at each point. Opsite does not read the meter for you. The Daily Moisture Readings checklist keeps the same points read each day.

How do we handle damage found after the walls are open?

Photograph it, price it as a change order and have the client sign before that work is done. The change order stays on the job with the photos.

Can one job cover the mitigation and the rebuild?

Yes. The six steps go from Emergency Response through Dry-Out, Demo and Rebuild to Final, with progress payments tied to them. If you bill the rebuild as a second contract, give it its own proposal.

How much does it cost?

Book a demo. We will show it on one of your own jobs and go over the plan that fits your company.

RS-107We contact you

See it on one of your own calls

Bring a real call from last week. We will book it, price it and close it in front of you.

  1. Leave your details. It takes a minute.
  2. We look at your company and contact you. A person calls or texts you.
  3. We show Opsite on your own calls. Then you decide.

We open access one company at a time. You do not need a card or a contract to ask.

RS-108

What is Opsite for restoration companies?

Opsite is software for contractors and service companies. For restoration companies it runs service calls from booked to paid, with a price book, options the customer signs on the phone, payment on the spot, a service report and a review request. Bigger jobs run as projects with their own steps, permits and inspections. Proposals, invoices, purchase orders, a time clock and a client portal are part of the same account.